| Q: |
What
is a USB enabled CompactFlash card? |
| A: |
USB-enabled CompactFlash™ integrates USB functionality into the
controller chip on the CompactFlash card. This patented technology enables
Lexar to manufacture and produce a low cost USB connectivity
solution for your Mac and PC platform. This solution only requires a USB-enabled CompactFlash card, a JumpShotTM cable, and a
CD-ROM
with optimized software drivers.
|
| |
|
| Q: |
What is JumpShot TM ? |
| A: |
JumpShot is a small
optimized USB cable used to connect your USB Enabled CompactFlash card with
your PC or Mac system at speeds up to 800 KB/sec.. JumpShot ONLY works with
USB-enabled CompactFlash cards. |
| |
|
| Q: |
What does the symbol CF+ represent? |
| A: |
This
symbol represents the CompactFlash Card is USB enabled and is 100% Digital
Film Compliant: it meets the CompacFlash specifications, contains
additional USB functionality, and is guaranteed to work in all digital
cameras. CF+ is a symbol established by the CompatFlash Association. The
CompactFlash Association (CFA) was established in October, 1995, as a
non-profit, mutually-beneficial industry association with the premise that
CF technology will result in the introduction of a new class of advanced,
small, lightweight, low-powered mobile products that will significantly
increase the productivity and enhance the lifestyle of millions of people. |
| |
|
| Q: |
Will the USB-enabled CompactFlash card work in my Digital Camera? |
| A: |
Yes. USB-enabled CompactFlash cards are guaranteed to work in all Digital Cameras plus it has the USB feature which means it also works with the JumpShot cable. |
| |
|
| Q: |
What are the system
requirements for JumpShot? |
| A: |
Windows
98, Windows 98 operating system with USB support, 486 CPU or higher, one
available USB port, 16MB or more RAM, 5MB of available hard disk space,
CD-ROM drive Macintosh, MacOS 8.5 or higher, one available USB port, 16MB or more RAM, 5MB of available hard disk space, CD-ROM drive. |
| |
|
| Q: |
Will older Lexar CompactFlash cards without the USB logo work in my JumpShot cable? |
| A: |
No. Only USB-enabled CompactFlash cards work with the JumpShot cable. |
| |
|
| Q: |
What systems are compatible with
USB-enabled CompactFlash cards? |
| A: |
Lexar's USB-enabled
CompactFlash cards have been exhaustively tested and
are compatible with digital cameras, notebook computers, card readers and
other CompactFlash-based systems.
|
| |
|
| Q: |
Are JumpShot cables compatible with all CompactFlash cards? |
|
A: |
Jumpshot cables
will operate with only USB-enabled Lexar CompactFlash cards. |
| |
|
| Q: |
How can I tell if my card is a
USB-Enabled CompactFlash card? |
|
A: |
All
USB-enabled CompactFlash cards have the "USB-enabled" logo clearly
marked on the top side of the card. |
| |
|
| Q: |
What will happen if I insert a
non-USB-enabled CompactFlash card in
JumpShot ? |
|
A: |
The activity LED on the JumpShot cable will not turn on and the card
will not be seen by the computer. This will not damage the non-USB-enabled
CompactFlash card, JumpShot or the computer system in any way. |
